跳到主要内容

2 篇博文 含有标签「openclaw」

查看所有标签

Enabling OpenClaw Control UI for LAN Access

· 阅读需 2 分钟
liruqi
liruqi
Founder of Chinapedia

Accessing the OpenClaw Control UI from other devices on your local network requires a few manual configuration changes to the gateway settings.

By default, OpenClaw might be restricted to local access for security. To enable LAN access (e.g., accessing from your phone or another laptop at http://192.168.1.x:18789), you need to update your configuration file.

Configuration Changes​

You need to modify the gateway section of your OpenClaw configuration. Specifically, ensure that bind is set to lan and that the controlUi section includes the correct allowedOrigins.

The final configuration should look like this:

{
  "gateway": {
    "port": 18789,
    "mode": "local",
    "bind": "lan",
    "controlUi": {
      "allowedOrigins": [
        "http://localhost:18789",
        "http://127.0.0.1:18789",
        "http://192.168.1.165:18789"
      ],
      "allowInsecureAuth": true,
      "dangerouslyDisableDeviceAuth": true
    }
  }
}

Key Settings Explained​

  • bind: "lan": Sets the gateway to listen on all local network interfaces instead of just the loopback interface.
  • allowedOrigins: You must explicitly list the IP address or hostname of your server here. Browsers enforce CORS, and the Control UI won't be able to talk to the gateway if its origin isn't allowed.
  • allowInsecureAuth: Set this to true if you are not using HTTPS on your local network (common for internal home labs).
  • dangerouslyDisableDeviceAuth: This skips device-specific authentication checks, making it easier to connect from multiple devices on the LAN. Use with caution in public networks.

Once you have applied these changes, restart your OpenClaw service openclaw gateway restart for the new settings to take effect.

开启 OpenClaw 控制界面的局域网访问

· 阅读需 2 分钟
liruqi
liruqi
Founder of Chinapedia

如果您在家庭服务器或专用机器上运行 OpenClaw，您可能希望从局域网（LAN）中的其他设备（例如手机或其他笔记本电脑）访问其控制界面。这需要对 gateway 部分进行一些配置调整。

默认情况下，出于安全考虑，OpenClaw 可能被限制为仅供本地访问。要开启局域网访问（例如通过 http://192.168.1.x:18789 访问），您需要更新配置文件。

配置更改​

您需要修改 OpenClaw 配置中的 gateway 部分。具体请确保将 bind 设置为 lan，并确保 controlUi 部分包含正确的 allowedOrigins。

最终配置应如下所示：

{
  "gateway": {
    "port": 18789,
    "mode": "local",
    "bind": "lan",
    "controlUi": {
      "allowedOrigins": [
        "http://localhost:18789",
        "http://127.0.0.1:18789",
        "http://192.168.1.165:18789"
      ],
      "allowInsecureAuth": true,
      "dangerouslyDisableDeviceAuth": true
    }
  }
}

关键设置说明​

  • bind: "lan"：设置网关在所有本地网络接口上监听，而不仅限于回环接口 (127.0.0.1)。
  • allowedOrigins：您必须在此处显式列出服务器的 IP 地址或主机名。浏览器强制执行 CORS 策略，如果其来源未被允许，控制界面将无法与网关通信。
  • allowInsecureAuth：如果您在局域网中不使用 HTTPS（家庭实验室常用），请将其设置为 true。
  • dangerouslyDisableDeviceAuth：这会跳过特定设备的身份验证检查，使从局域网上的多个设备连接更加容易。在公共网络中请谨慎使用。

完成这些更改后，请重启您的 OpenClaw 服务：执行 openclaw gateway restart 以使新设置生效。